“grain boundary”可以造什么句，grain boundary造句

The plane defects of metals and alloys include grain boundary, sub-grain boundary, twins grain boundary, phase boundary, stacking fault, outward surface, etc.

The grain boundary energy was measured with thermal etching method.

Study on the UV photo-sensitive characteristic and grain boundary barrier of ZnO thin films

Finally, the characteristics of grain boundary electron barrier were described properly with superimposed barrier model.

This paper shows that inheritance phenomenon of coarse austenite grains are due to the boundary segregation of carbide along the prior austenite grain boundary.

The results indicated that the effect of with or without grain boundary is significant to specific resistance, but the effect of quantity of grain boundaries is much smaller.

BN interwoven microstructure will prevent grain boundary slip and reduce the attenuation rate of high temperature strength.

The effect of aging treatment on corrosion sensitivity is closely related to S' phase, the phase precipitated in grain boundary and precipitate-free zone.

The substructure near the damage position was studied by EBSP, then vonbined with the relationship among substructure grain boundary sliding grain size and material deformation compatibility the mechanics of creep damage was discussed.

Corrosion resistance, the surface treatment of the product is amorphous coating, without a grain boundary, so particular corrosion resistance(see Table 1).

grain boundary precipitate

Conductivity varies with grain size of GDC films due to the grain boundary space charge effect, the smaller the grain size, the higher the conductivity and vice versa.

And energy spectrum analysis indicates that carbon was reach 50% in some grain boundary.

Analysis of element distribution shows that the enrichment of si and Cu exists on the grain boundary.

The total quantity of corrosion surface defect is decreased due to the decrease of grain boundary energy with the increase of grain size and the atmospheric corrosion resistance is increased.

It is observed that considerable liquation microcracks and some other microffissures called solid-state microcrack initiate in the regions nearby the fusion line and propagate across the grain boundary.

Molecular dynamical investigation on plastic behavior of Cu(100) twist-grain boundary under uniaxial tension

The injecting saturate minority carrier current may be reduced the most effectively by the first grain boundary.

EBSD analyses on grain orientation and grain boundary structure of grain-oriented silicon steel

In the process of superplastic deformation, the dislocation sliding has important cordinating effect, so that the grain boundary sliding proceeds easily.

It has been demonstrated that the boron segregation at austenite grain boundaries in quenched steel is a non-equilibrium grain boundary segregation phenomena occurred during cooling.