“rotating speed”可以造什么句，rotating speed造句

The mechanism can be adapted to the operation of the transplanting machine at any rotating speed.

The influence of control method for pitch on power flowing and rotating speed of the vane are focused.

The low speed machine usually has a short and fat structure in order to use effectively the rotating speed of the rotor, as contrasted with the long and thin structure of the high speed machine.

There are many characteristic parameters in fuel pressure wave, and they can be used as fault diagnosis parameters of fuel supply system and rotating speed in diesel engine.

By using the laser-electronic timing method,the auther of this paper measured the rotating speed of the knen joints and the running speed of the sprint,and also studied the correlation between them.

It is verified experimentally that both stability of rotating speed and accuracy of linear velocity of this calibrating disk system have achieved or exceeded the desire of designing parameters.

The porosity powder amount increases with increasing rotating speed of rod.

The main factors affecting lay length of core strand of steel cord are draught speed, rotating speed of revolver, distance of laying, twist direction.

A high precision and high performance servo-drive system needs a rotating speed estimation algorithm which has high accuracy, fast response and high resolution in a wide range.

In order to carry out the constant line speed and the constant tension for the rolling of plastic films during reversal, loop control of the rotating speeds and the tension is adopted.

The effects of gas flow rate and rotating speed on the fluid field, local void fraction distribution and bubble size distribution were investigated.

By the kinematic analysis of flow, and the analysis of drive moment and resistance moment, the rotating speed expression of self-rotating twisted tape was deduced.

FL-7 is a continuous transonic wind tunnel, which is powered by three engines. Mach number is adjusted by the rotating speed of engines, the flexible wall nozzle and the by-pass valve.