“inside diameter”可以造什么句，inside diameter造句
The drift diameter is the inside diameter (ID) that the pipe manufacturer guarantees per specifications.
This paper analyzes the variation principles and influence factors of inside diameter in tube press expansion.
To guarantee the inside diameter of a pipe or other cylindrical tool by pulling a cylinder or pipe (rabbit) of known outside diameter through it.
The kelly bushing (KB) has an inside diameter profile that matches that of the kelly, usually square or hexagonal.
The present paper discussed the problems during the production of thick-wall glass by application of new technology of inside diameter controlling with vacuum method.
The prepared core pipe with 75mm to 360mm of inside diameter and 7mm to 30mm of wall thickness can replace various paper core pipes, thereby having a wide popularization and application prospect.
For small male and female joints care should be taken in the use of these dimensions to insure that the inside diameter of fitting or pipe is small enough to permit sufficient bearing surface to prevent the crushing of the gasket.
The inside diameter of is diversion is1.1-1.3 meters, with the totallength of776 meters.
Girth flange bolting shall be of stud bolt type, threaded full length, and at least M16 for flange of 600 mm and smaller inside diameter and at least M20 for over 600 mm inside diameter flange.
In this laser the discharge tube with an inside diameter of 8mm and discharge length of 300mm is made of water-cooled segmented aluminium disks.
Inside diameter of fitting should match inside diameter of pipe as specified by purchaser.
The thickness of blood vessels, inside diameter, area, flow, the length of color flow column, maximum velocity, acceleration and deceleration time were of good value on pulse tension.
Full diameter structure of ball valve ensures the conformity of inside diameter of passage and pipeline, with the fluid resistance minimized and easy for cleaning pipeline.
On the producing process of the miniature metal halide lamp, due to its bulk, the measurement of its dimensions especially the inside diameter of the necks of the electric arc tube is very difficult.
