“gasket”可以造什么句,gasket造句

来源:语文精选馆 1.29W
gasket造句

The engine had blown a gasket, ie the gasket had suddenly let steam, etc escape.

This collar acts as a kind of gasket .

Flange form different requirements, the use of gasket are different.

This gasket ring can't be used any more.

Slide the one-piece gasket over the dowels and onto the block.

Remove the bezel and rubber gasket from the motor output shaft.

Are products are: water polo foot o ring gasket seals sucker Washers silicone chip nail head gasket sets of plastic earplugs dust jacket sets of rings, such as sealing ring.

If the gasket breaks down, small holes develop between the cylinder and the cylinder head, and these holes cause leaks.

Soft carbon steel sealing gasket of 100 Brinnel, silver-plated for soft corrosion-resistant coating, provides large contact area for perfect sealing.

It also owns a rubber factory which offers car rubber strip and rubber gasket to FAW, and is engaged in the rubber research for IBM, Apple and Samsung.

The gasket had a center cut-out and six holes along the edge. The inside edge of the cut-out, along with one of the holes, was lined with a bead of rubber.

When the pipe joint screw, should follow the principle of diagonal twist, not one by one in order to operate, do not screw the screw die, so that the correct installation of rubber gasket.

For small male and female joints care should be taken in the use of these dimensions to insure that the inside diameter of fitting or pipe is small enough to permit sufficient bearing surface to prevent the crushing of the gasket.

A spring gasket is also arranged between the flat gasket and the nut.

Improved gasket design allows sealing at lower clamping pressures.

The urethane liner extends over the flange face to serve as the valve's flange gasket.

A shielding gasket is disposed around the shielding shell and has overlapping rows of beams extending therefrom.

When the chical process pump transmission medium, the tperature and pressure is not high, the general choice of non-metallic gasket;

This paper is based on the sealing reliability of flange for the DSHE and submits a predicting calculation' s method of the bolt for seating gasket used in circular-shaped cover of the DSHE.

The gasket cannot be reused after removal.

After testing several alternative gaskets, we selected the best performing gasket in our tests - a corrugated steel gasket with graphite filled channels.

When the gasket is placed on the block and the head installed, tightening of the head bolts squeezes the soft metal so that the joint is effectively sealed.

The article based on fabrication process of the pre-heater which is the equipment of hydrogen manufacturing unit, and the forming of Cr-Mo steel coil and welding gasket was analyzed.

A gasketed connection has four parts: the valve outlet, a nipple, a nut, and a gasket (or washer).

The clapboard is sealed by "U" sealed gasket.

The pressure cooker with the double leak-prevention seal ring is characterized in that the metal rim (5) is mounted in the center of the rubber gasket(4).

热门标签