“flange”可以造什么句，flange造句

flange of lower shell

Angle flange Standard. Flat flange: Specify hole pat-tern. If no drawing provided, flange will be blank.

The blind flange is a solid device resembling a flange with no hole in it.

When connecting flange, add sealing mat and lock connected bolt.

The concave flange and the convex flange are provided with central pylomes for the conveying pipes to extend into; the concave flange is connected with the convex flange by the binding bolts.

Installation size, standards or rib flange dimensions, other special requirements.

Corresponding sizes of class 150 (aNSI B16.24) flange diameters and drilling templates are the same as those of the american Class 125 Cast Iron Flange Standard (aNSI B16.1) and of the american Class 150 Steel Flange Standard (aNSI B16.5).

ANSI flange sealing principle is extremely simple: the two bolts each other extrusion flange sealing surface and form a seal gasket.

After the bead is started over the rim flange with the tool, the remainder of the bead can be worked out over the flange with the hands.

Technology: flange type of heating is heating pipe and welding flanges from fixed.

Sliding contact surfaces of the guide flange of the inner ring.

The wheel flange wear is caused by the flange action of the wheel and rail, whereas the double-groove wear on tread may be mainly caused by the break shoe.

The inner cup also has a radially extending flange that engages a radial portion of the elastomeric seal body.

Automobile parts: automobile & motorbike parts, modifying accessories, steel rim flange body, diesel particle catcher body…and etc.

The Mengtsun county guarantees the Saint bend flange factory to have the good prestige and the quality guarantee.

A butterfly isolation valve cannot be installed directly to the valve inlet flange, as the disc will contact the orifice plate.

In the inside of blade, the lightning conduction part will conduct electricity from acceptance to flange of blade root, to the engine room from hub.

Install pressure gauge on the outlet flange of the pipe with screw, the user can install the pressure gauge at this to determine when the water pressure pump is running.

A wear-resistant bushing is sheathed on a tail end sleeve end tube, and a flange of the bushing is pressed between the tail wing plate and the tail end sleeve tube.

Time for the third kind of closing well is so long that flange steel ring groove on the top of casing-head is heavily corroded in M4 well being situated in Tarim basin.

Many flange for rotating: circular flange and square flange.

Remove cover and clean flange and reseal.

The spinning forming of flange for stainless steel pan, including two process method namely necking and bulge flange, is introduced.

ANSI flange sealing principle is very simple: bolt two seal face mutual extruding flange gaskets and formed the seal.

"Interference may also occur when butterfly valves are bolted directly to the outlet flange of a swing check, silent check, or reducing flange."

Reattach the relief valve hose to the elbow in the bottom flange cover.

Cracks have been found in the flange and web splices at groove welds in at least four Bridges.

The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.

Kits include mounting plate and hardware for mounting to flange or servo mount encoders, making them interchangeable with 5PY DC tach generators.

Produce and sell six head bolt, bolt, pairs of head bolt, carriage bolt the six flange, make screw up, get into tail screw, the whole tooth silk pole mainly.

CHENGGUANG F& P is the main product of our company, including various valve seal, flange gaskets, washers, plate, bar, pipe, gaskets, cutting boards, turning film, Turning filled with all kinds of products and, of PTFE valve accessories, and other abnormal conditions.

The urethane liner extends over the flange face to serve as the valve's flange gasket.

Large flange is the first cut into the right of the board, the length of the length according to the specifications of large flange.

The contribution of flange to the anti-shear of joints has the characteristic of lag.

The paper founded rolling model of H beam through developing MARC software. On unchanging web reduction, stress and strain change because flange reduction are different.

You will cut your tail off at this location and knowing David there will be a nice flange that will allow you to slide this cast cone in place with ease.

Another, flange supplying the various pipeline accessory, if elbow etc.

The machine can not only process the U、 V welding line of end sloping back ridging, edge cutting for carbon steel stainless steel and allayed steel pipes, but also can treat the welded convex flange and plain flange.

Remove holder and coolant flange.

The method of surfacing welding sealing strip was adopted to repair the deformation of the flange joint surface of the high and intermediate pressure outer casing .

The annular flange closely contacts the upper surface or underside of the table.