“relief valve”可以造什么句，relief valve造句

This positions the relief valve below the first check valve, enabling the zone to drain through the relief valve outlet.

Place the relief valve seat back into the chamber bore.

Check valve and relief valve on the output of the gear pump tube had better install a check valve.

Common pressure-relief devices are a pressure-relief valve for primary protection and a rupture disc for secondary protection.

Install the high pressure relief valve in the compressor manifold fitting.

Reattach the relief valve hose to the elbow in the bottom flange cover.

You need to design a plant to show that you can handle an inadvertent opening of the pressurised relief valve.

The mechanism and design adopted in the relief valve performance - testing table are presented in this paper.

Built-in pressure relief valve to protect the unit against any abuse from strong pressure or strong wind when closing the door.

"As thermal expansion conditions develop, pressure builds up to the setting of the relief valve. This will cause discharging of small quantity of water."

Other cars use a sealed cap and have separate vacuum-and pressure-relief valves.

Do not plug the temperature and pressure relief valve.

Check the temperature-pressure relief valve to insure that the valve has not become incrusted with lime.

Another type of car uses a sealed tank cover with a separate vacuum - pressure relief valve.

As a pressure relief valve, it can maintain the water pressure in the set way below the safe value;

Requirements: the pressure differential relief valve must operate to maintain the "zone" between the two check valves at least 2 PSI less than the supply pressure.

pressure relief valve spring

No relief valve is required where two pressure reducing valves are installed.

"Also, lubricating system Service and Maintenance jobs include changing oil, servicing the oil-pressure relief valve and the crankcase ventilator valve, changing the oil filter, and servicing the oil pump and the oil-pressure indicator."

The relief valve may be serviced while on or off the backflow preventer valve.

In order to avoid screw pump is damaged, usually installed in the screw pump bypass relief valve outlet to a stable outlet pressure, keep the pump running.

This one is the familiar one, inadvertent opening of a pressurised safety or relief valve in a PWR or a safety valve in a BWR.