“dowel”可以造什么句，dowel造句

Tooling Plate: Easy access mounting, accurate dowel location, accepts shocks.

Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange.

Step Four: Next, take the dowel; using a grinding instrument (I used an industrial one because it was quicker) grinds the dowel at uneven intervals to give a rough, rugged, distorted bark effect.

Pull out the jig dowel posts, get your hand into the sound hole and carefully peel away the cardboard jig.

Using ga pencil sharpener put a point on each end of the wooden dowel(it is not necessary to make a sharp point-blunt willdo).

Conclusion This method could obtain the strength of crown dowel with root cavity without fall and cleft so that to save time and payment and prolong the use of ceramic teeth.

The load transfer on dowels is modeled as vertical springs, whose stiffness depends on the dowel properties and the dowel-plate interaction.

Also, make sure one end of the dowel is slightly ointed. This art would represent the top of the tree.

Tack out the dowel in lower part of handle of the valve, and undraw the agraffe gently. Rotate handle of the valve clockwise to open valve to begin discharging.

Where possible screw and dowel hole clearance will be provided in the manifold.

Cut the dowel down to 20cm in length.

The transfer of shearing and moment must be considered in dynamic analysis because the model of dowel bar affects the modal frequency and modal shape directly.