“impingement”可以造什么句，impingement造句

Effects of the impingement distance, the impinging hole arrangement and the initial crossflow on heat transfer characteristics are investigated.

The headless screw must be fully buried beneath the articular cartilage of the proximal scaphoid to avoid radioscaphoid impingement.

Direct heating methods such as flames, steam impingement, electrical resistance elements, water bath immersion, hot plates, and ovens should not be used.

An experimental investigation was carried out to predict the Critical Heat Flux (CHF) of convective boiling of 2 subcooled liquids for a round jet impingement on the stagnation zone of a hot surface.

If patients do experience a decreased ROM as a consequence of impingement, then subluxation and edge loading may occur, which can lead to a higher wear rate and early failure.

The analysis shows that the impingement caused by the high speed jet is the main reason of sporoderm broken.

radiant flame, steam impingement on the container, immersion in a heated water bath or electrical resistance heater elements in direct contact with the container.

Also, due to the splash and rebounding influence the droplet collection efficiency and impingement limit decrease 11.8% and 35.7%, respectively.

A steady heat transfer experiment was carried out for predicting the critical heat flux (CHF) of convective boiling for a round R-113 liquid jet impingement on the stagnation zone of a hot surface.

The spray wall-impingement experiments of dimethyl ether(DME) and diesel were carried out in a constant volume chamber by using a high speed camera.