“welding process”可以造什么句，welding process造句

The application of Ar-CO2 mixed gas in the welding of low-carbon steel could improve welding process, increase welding quality and decrease welding cost.

Localized heating from the welding process and subsequent rapid cooling induces welding shrinkage stresses along weld bead during welding thin-wall plate and causes structural buckling distortions.

It is impermissible to charge the battery with a charger during the hot-melt welding process.

Research on electromagnetic compatibility of plasma arc welding process control system

The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.

We also present effective control measures for the problems such as flammability and big transformation in magnesium alloy welding process.

These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.

A method about improving the crack resistance of weld metal and reducing structure stress during welding process, i. e. hammering welds and watered rapid cooling after welding, was obtained.

The transient temperature field, stress field, deformation field, and the axial shortening during the continuous-drive friction welding process of GH4169 rod were calculated using this model.

The studying results indicate that the magnitude and distribution of residual stress are related to the heat input created by welding process and to the cross section geometry.

In view of the high density polyethylene plate used in the experiment with high transparency, can analyze the morphological changes of the generated during the welding process in real time.

Aiming at the characteristic of pulse submerged arc welding process with change wire= feed system, the simuloting model was developed by the software of MATLAB/ SIMULINK which consists of the main circuit simulation model, arc load system simulation model and arc changing system simulation model.

Stability welding process, welding spatter small.

According to the different product structure, butt fusion welding process and lap seam welding process are used to respectively weld left and right half shell of upper body.

The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.

In addition, the choice of the weld shape strongly affects the welding process and the manufacturing costs.

In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.

With adjustable eccentric pressure work piece applied on this welder, welding process is artificially controlled with proper current and upset force.

Do not watch welding processes unless your eyes are properly protected.

The method can simplify the welding process, improve the production efficiency and reduce the production cost;

By using manual arc welding to repair the big kiln circle, the welding process of ZG310-570 super thick cast steel piece was a success, with good running effect observed for more than 5 years.

Re melt deposit welding process is proposed in this paper. To realize the technology, plasma arc, TIG arc, high frequency induction, gas shield continuous stove and MSW are adopted.

The optimum prescription was finally determined by the property tests of the welding process and weld metal.

Through precise control of welding process parameters, one-side welding enameled wire to copper foil is realized.

Because TIG welded joints without filler wire always hold low strength and poor formation, tungsten inert gas welding process with filler wire is inevitable.