“motherboard”可以造什么句，motherboard造句

Connect the DB-9 connector to the motherboard as above.

If the controller is built on the motherboard, then the only option is to replace a motherboard.

A RAID might be well advised, thus the motherboard would need support for it.

Excellent thermal solutions for the superior heat DP motherboard solutions, excellent internal air duct design.

In the late 1990s, there were trends in the external device designed to chip directly installed on the motherboard.

Many manufacturers have tried different levels of integration, some or even all of these devices are installed on the motherboard.

If the integrated parts can not be mobile, it will be difficult to upgrade product specifications, and highly integrated motherboard often requires non-standard chassis.

Just because a motherboard or a display tube is physically restricted to a particular place is no reason your work should be.

Dust can easily lead to poor contact socket and board, in addition, some CARDS on the motherboard, the form of chip pins, and is often due to oxidation and poor contact pin.

They were all busy, rushing about the motherboard.

Connect the fan power cable to the CPU fan connector on the motherboard.

The performance of nvidia and ati motherboard has been also improved with addition of nvidia sli and cross fire technologie.

The above figure shows a module which came from the purchase of motherboard. I unscrewed the DB-9 connector from the module for use.

Add function:1, support ATX motherboardmotherboard specifications, size through to kill;

My colleague from IT dept got through the hot line, someone will replace the motherboard for me today.

The IPC technology is used in the LMU which is based on ISA bus. The LMU has the structure of motherboard plus plug-in board, which can carry out hardware-configuration easily.

In addition, the appearance of multiple-processor architectures supported by extremely fast motherboard architectures seems to make distributed file system issues a lesser priority.

We disconnected several ribbon cables from the motherboard before proceeding. Six Phillips screws hold the motherboard and its attached heat sink and fan in place.